ABB ACS880 Firmware Manual page 96

96 Parameters
No. Name/Value
120.12 Run enable 1
Off
On
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
120.19 Enable start signal
Off
On
DI1
DI2
DI3
DI4
DI5
DI6
Description
Selects the source of the run enable signal. If the run enable
signal is switched off, the DC/DC converter unit will not start,
or stops if running.
1 = Run enable.
Note: Digital inputs and digital input/outputs can be
reserved for use in the control program.
Note: This parameter cannot be changed while the
converter is running.
0.
1.
Digital input DI1 (as indicated by
bit 0).
Note: DI1 is reserved for temperature fault in the control
program. Do not select it for any other use.
Digital input DI2 (as indicated by
bit 1).
Digital input DI3 (as indicated by
bit 2).
Digital input DI4 (as indicated by
bit 3).
Digital input DI5 (as indicated by
bit 4).
Digital input DI6 (as indicated by
bit 5).
Digital input/output DIO1 (as indicated by
delayed status, bit 0).
Digital input/output DIO2 (as indicated by
delayed status, bit 1).
Source selection (see Terms and abbreviations
45).
Selects the source for the start enable signal.
1 = Start enable.
With the signal switched off, the converter will not start.
(Switching the signal off while the converter is running will
not stop it.)
Note: Digital inputs and digital input/outputs can be
reserved for use in the control program.
0.
1.
Digital input DI1 (as indicated by
bit 0).
Note: DI1 is reserved for temperature fault in the control
program. Do not select it for any other use.
Digital input DI2 (as indicated by
bit 1).
Digital input DI3 (as indicated by
bit 2).
Digital input DI4 (as indicated by
bit 3).
Digital input DI5 (as indicated by
bit 4).
Digital input DI6 (as indicated by
bit 5).
110.02 DI delayed status,
110.02 DI delayed status,
110.02 DI delayed status,
110.02 DI delayed status,
110.02 DI delayed status,
110.02 DI delayed status
111.02 DIO
111.02 DIO
on page
110.02 DI delayed status,
110.02 DI delayed status,
110.02 DI delayed status,
110.02 DI delayed status,
110.02 DI delayed status,
110.02 DI delayed status
Def/FbEq16
On
0
1
2
3
4
5
6
7
10
11
-
On
0
1
2
3
4
5
6
7