ABB ACS880 Firmware Manual page 60

60 Parameters
No. Name/Value
110.21 RO status
0000h...FFFFh
110.24 RO1 source
Not energized
Energized
Ready
Started
Running
Warning
Fault
Fault (-1)
Other [bit]
110.25 RO1 ON delay
Source
signal status
RO status
0.0 ... 3000.0 s
110.26 RO1 OFF delay
0.0 ... 3000.0 s
Description
Shows the status of relay outputs RO8...RO1.
Example: 00000001 = RO1 is energized, RO2...RO8 are
de-energized.
Status of relay outputs.
Selects a DC/DC converter unit signal to be connected to
relay output RO1.
Note: For the cabinet-installed DC/DC converter units,
ACS880-1607, check the delivery-specific use from the
delivery-specific circuit diagrams. Do not change the setting
if relay output is in use and connected already.
Relay output is not energized.
Relay output is energized.
Bit 0 of 106.11 Main status word
energized when the DC/DC converter unit is ready.
Bit 4 of 106.16 Status word 1
energized when the DC/DC converter unit is started.
Bit 1 of 106.11 Main status word
energized when the DC/DC converter unit is running.
Bit 7 of 106.11 Main status word
energized when a warning is active.
Bit 3 of 106.11 Main status word
energized when a fault is active.
Inverted bit 3 of 106.11 Main status word
Relay is de-energized when a fault is active.
A specific bit in another parameter.
Defines the activation delay for relay output RO1.
t t
On Off
t 110.25 RO1 ON delay
On
t 110.26 RO1 OFF delay
Off
Activation delay for RO1.
Defines the deactivation delay for relay output RO1. See
parameter 110.25 RO1 ON
Deactivation delay for RO1.
(see page 53). Relay is
(see page 53). Relay is
(see page 53). Relay is
(see page 53). Relay is
(see page 53). Relay is
(see page 53).
1
0
1
0
Time
t t
On Off
delay.
Def/FbEq16
-
1 = 1
Running
0
1
2
3
4
5
6
9
-
0.0 s
10 = 1 s
0.0 s
10 = 1 s