System - ABB ACS880 Firmware Manual

No. Name/Value
195.20 HW options word 1
Bit Name
0 Reserved.
1 Reserved.
2 Reserved.
3 Reserved.
4 Reserved.
5 Reserved.
6 Reserved.
7 Reserved.
8 Reserved.
9 Reserved.
10 Reserved.
11 Reserved.
12 Reserved.
13 DOL fan
14 Reserved.
15 Reserved.
0000h...FFFFh
196

196 System

196.01 Language
Not selected
English UK
196.02 Pass code
0...99999999
Description
Specifies hardware-related options that require
differentiated parameter defaults. Activating a bit in this
parameter makes the necessary changes in other
parameters.
Information
Direct-on-line cooling fan is used instead of speed-controlled
cooling fan.
Hardware options configuration word.
Language selection; pass code; parameter save and
restore; control unit reboot.
Selects the language of the parameter interface and other
displayed information.
No language selected.
UK English.
Pass codes can be entered into this parameter to activate
further access levels (see parameter
status) or to configure the user lock.
Entering "358" toggles the parameter lock, which prevents
the changing of all other parameters through the control
panel or the Drive composer PC tool.
Entering the user pass code (by default, "10000000")
enables parameters 196.100...196.102, which can be used
to define a new user pass code and to select the actions
that are to be prevented.
Entering an invalid pass code will close the user lock if
open, ie, hide parameters 196.100...196.102. After entering
the code, check that the parameters are in fact hidden.
Note: You must change the default user pass code to
maintain a high level of cybersecurity. Store the code in a
safe place – the protection cannot be disabled even by ABB
if the code is lost.
See also section User lock
Pass code.
196.03 Access level
(page 44).
Parameters 143
Def/FbEq16
-
1 = 1
Not selected
0
1033
0
1 = 1