Terms And Abbreviations - ABB ACS880 Firmware Manual

152 Additional parameter data

Terms and abbreviations

Term Definition
Actual signal Signal measured or calculated by the DC/DC converter unit. Usually can only be
monitored but not adjusted; some counter-type signals can however be reset by entering
the value 0.
Analog src Parameter can be set to the value of another parameter by choosing Other, and selecting
the source parameter from a list.
In addition to the Other selection, the parameter may offer other pre-selected settings.
Binary src Value of the parameter can be taken from a specific bit in another parameter value
(Other). Sometimes the value can be fixed to 0 (False) or 1 (True).
In addition to the Other, False and True selections, the parameter may offer other pre-
selected settings.
Data Data parameter.
FbEq32 32-bit fieldbus equivalent: Scaling between the value shown on the panel and the integer
used in fieldbus communication when a 32-bit value is selected for transmission to an
external system.
Corresponding 16-bit scalings are listed in chapter
List Selection list.
No. Parameter number.
PB Packed boolean.
Real
16-bit value 16-bit value (31 bits + sign)
= integer value
Type Data type. See
Fieldbus addresses
Refer to the User's manual of the fieldbus adapter.
= fractional value
Analog src, Binary src, List, PB, Real.
Parameters (page 45).