ABB ACS880 Firmware Manual page 75

No. Name/Value
114.20 AI supervision
selection
Bit Name
0 AI1 < MIN
1 AI1 > MAX
2 AI2 < MIN
3 AI2 > MAX
4 AI3 < MIN
5 AI3 > MAX
6...15 Reserved
0000h...FFFFh
114.21 DIO3 output source
114.22 DI3 ON delay
0.00 ... 3000.00 s
114.22 DIO3 ON delay
*DIO status
**Delayed DIO status
tOn = 114.22 DIO3 ON delay
tOff = 114.23 DIO3 OFF delay
*Electrical status of DIO (in input mode) or status of selected source (in output mode). Indicated by
status.
**Indicated by 114.06 DIO delayed
0.0 ... 3000.0 s
114.22 AI force sel
Bit Value
0 1 = Force AI1 to value of parameter
1 1 = Force AI2 to value of parameter
2 1 = Force AI3 to value of parameter
3...31 Reserved.
00000000h ...
FFFFFFFFh
Description
(Visible when 114.01 Module 1 type
Specifies the analog input limits to be supervised. See
parameter 114.19 AI supervision
Description
1 = Minimum limit supervision of AI1 active.
1 = Maximum limit supervision of AI1 active.
1 = Minimum limit supervision of AI2 active.
1 = Maximum limit supervision of AI2 active.
1 = Minimum limit supervision of AI3 active.
1 = Maximum limit supervision of AI3 active.
Activation of analog input supervision.
(Visible when 114.01 Module 1 type
Selects a signal to be connected to digital input/output DIO3
when parameter 114.19 DIO3 configuration
For the available selections, see parameter
output source.
(Visible when 114.01 Module 1 type
Defines the activation delay for digital input DI3. See
parameter 114.12 DI1 ON
Activation delay for DI3.
(Visible when 114.01 Module 1 type
Defines the activation delay for digital input/output DIO3.
t t
On Off
status.
Activation delay for DIO3.
(Visible when 114.01 Module 1 type
The true readings of the analog inputs can be overridden
for, eg, testing purposes. A forced value parameter is
provided for each analog input, and its value is applied
whenever the corresponding bit in this parameter is 1.
114.28 AI1 force
114.43 AI2 force
114.58 AI3 force
Forced values selector for analog inputs.
= FIO-11 or FAIO-01)
function.
= FIO-01)
is set to Output.
114.11 DIO1
= FDIO-01)
delay.
= FIO-01 or FIO-11)
t
On
= FIO-11 or FAIO-01)
data.
data.
data.
Parameters 75
Def/FbEq16
0000h
1 = 1
Not energized
0.00 s
10 = 1 s
0.0 s
1
0
1
0
Time
t
Off
114.05 DIO
10 = 1 s
00000000h
1 = 1