ABB ACS880 Firmware Manual page 120

120 Parameters
No. Name/Value
136.06 AL2 signal
136.07 AL2 signal base
0.00 ... 32767.00
136.09 Reset loggers
Done
All
PVL
AL2
136.10 PVL peak value
-32768.00 ...
32767.00
136.11 PVL peak date
-
136.12 PVL peak time
-
136.13 PVL current at peak
-32768.00 ...
32767.00 A
136.14 PVL DC voltage at
peak
0.00 ... 2000.00 V
136.15 PVL power at peak
0.00 ...
30000.00 kW
136.16 PVL reset date
-
136.17 PVL reset time
-
136.20 AL1 0 to 10%
0.00 ... 100.00%
136.21 AL1 10 to 20%
0.00 ... 100.00%
136.22 AL1 20 to 30%
0.00 ... 100.00%
136.23 AL1 30 to 40%
0.00 ... 100.00%
Description
Selects the signal to be monitored by amplitude logger 2.
The signal is sampled at 200 ms intervals.
The results are displayed by parameters 136.40...136.49.
Each parameter represents an amplitude range, and shows
what portion of the samples fall within that range.
The signal value corresponding to 100% is defined by
parameter 136.07 AL2 signal
Amplitude logger 2 can be reset using parameter
Reset loggers. The date and time of the last reset are stored
into parameters 136.50
For the selections, see parameter
Defines the signal value that corresponds to 100%
amplitude.
Signal value corresponding to 100%.
Resets the peak value logger and/or amplitude logger 2.
(Amplitude logger 1 cannot be reset.)
Reset completed or not requested (normal operation).
Reset both the peak value logger and amplitude logger 2.
Reset the peak value logger.
Reset amplitude logger 2.
Peak value recorded by the peak value logger.
Peak value.
The date on which the peak value was recorded.
Peak occurrence date.
The time at which the peak value was recorded.
Peak occurrence time.
Line current at the moment the peak value was recorded.
Line current at peak.
Voltage in the intermediate DC circuit at the moment the
peak value was recorded.
DC voltage at peak.
Power at the moment the peak value was recorded. See
parameter 101.12 Power.
Power at peak.
The date on which the peak value logger was last reset.
Last reset date of the peak value logger.
The time at which the peak value logger was last reset.
Last reset time of the peak value logger.
Percentage of samples recorded by amplitude logger 1 that
fall between 0 and 10%.
Amplitude logger 1 samples between 0 and 10%.
Percentage of samples recorded by amplitude logger 1 that
fall between 10 and 20%.
Amplitude logger 1 samples between 10 and 20%.
Percentage of samples recorded by amplitude logger 1 that
fall between 20 and 30%.
Amplitude logger 1 samples between 20 and 30%.
Percentage of samples recorded by amplitude logger 1 that
fall between 30 and 40%.
Amplitude logger 1 samples between 30 and 40%.
base.
and 136.51 respectively.
136.01 PVL signal.
Def/FbEq16
136.09
100.00
1 = 1
Done
0
1
2
3
0.00
1 = 1
-
-
-
-
0.00 A
1 = 1 A
0.00 V
10 = 1 V
0.00 kW
1 = 1 kW
-
-
-
-
0.00%
1 = 1%
0.00%
1 = 1%
0.00%
1 = 1%
0.00%
1 = 1%