ABB ACS880 Firmware Manual page 108

108 Parameters
No. Name/Value
Other [bit]
131.02 External event 1
type
Fault
Warning
Pure event
Warning/Fault
131.03 External event 2
source
131.04 External event 2
type
Fault
Warning
Pure event
Warning/Fault
131.05 External event 3
source
131.06 External event 3
type
Fault
Warning
Pure event
Warning/Fault
131.07 External event 4
source
131.08 External event 4
type
Fault
Warning
Pure event
Warning/Fault
131.09 External event 5
source
Description
Source selection (see Terms and abbreviations
45).
Selects the type of external event 1.
The external event generates a fault.
The external event generates a warning.
The event is only logged with a time stamp. No fault or
warning is generated.
If the DC/DC converter unit is running, the external event
generates a fault. Otherwise, the event generates a
warning.
Defines the source of external event 2. See also parameter
131.04 External event 2
For the selections, see parameter
source.
Selects the type of external event 2.
The external event generates a fault.
The external event generates a warning.
The event is only logged with a time stamp. No fault or
warning is generated.
If the DC/DC converter unit is running, the external event
generates a fault. Otherwise, the event generates a
warning.
Defines the source of external event 3. See also parameter
131.06 External event 3
For the selections, see parameter
source.
Selects the type of external event 3.
The external event generates a fault.
The external event generates a warning.
The event is only logged with a time stamp. No fault or
warning is generated.
If the DC/DC converter unit is running, the external event
generates a fault. Otherwise, the event generates a
warning.
Defines the source of external event 4. See also parameter
131.08 External event 4
For the selections, see parameter
source.
Selects the type of external event 4.
The external event generates a fault.
The external event generates a warning.
The event is only logged with a time stamp. No fault or
warning is generated.
If the DC/DC converter unit is running, the external event
generates a fault. Otherwise, the event generates a
warning.
Defines the source of external event 5. See also parameter
131.10 External event 5
For the selections, see parameter
source.
on page
type.
131.01 External event 1
type.
131.01 External event 1
type.
131.01 External event 1
type.
131.01 External event 1
Def/FbEq16
-
Fault
0
1
2
3
Inactive (true)
Fault
0
1
2
3
Inactive (true)
Fault
0
1
2
3
Inactive (true)
Fault
0
1
2
3
Inactive (true)