Front Panel Run Mode Menus - Tabor Electronics 5064 User Manual

2074
User Manual
Soft TOP
Key Menu
B Run Mode
A
B
C
D
(*) ↓D denotes you have to scroll down to access the menu. Scroll using the arrows up or down or the dial.
Soft TOP
Key Menu
C Utility
A
B
C
D
D Outputs
3-10
Table -3, Front Panel Run Mode Menus
nd rd
2 Level 3 Level
Menu Menu
Continuous
Triggered
Gated
Burst
Table -4, Front Panel Utility and Output Menus
2nd Level 3rd Level
Menu Menu
Factory Reset
Customize
System
Remote Setup
Select interface
GPIB
USB
LAN
Notes
Provides access to 2074 Run Mode options:
Continuous, Triggered, Gated and Counted
Burst
Selects the continuous run mode
Selects the triggered run mode. Provides
access to trigger parameters, re-trigger on/off
and re-trigger parameters
Selects the gated run mode. Provides access to
gating parameters
Selects the triggered run mode. Provides
access to counted burst parameters, re-trigger
on/off and re-trigger parameters
Notes
Provides access to factory reset, display
customization, remote setup and system parameters
Allows reset of all 2074 parameters to factory default
values
Provides access to display customization: horizontal
units, clock sources, load impedance, dial direction
and display brightness
Displays all 2074 system parameters, including serial
number, installed option, last calibration date. Also
monitors internal temperature rise.
Provides access to selecting the remote interface.
Available interfaces are LAN, USB and GPIB
Selects between GPIB, USB and LAN
Programs GPIB address
Display information on the USB ID
Programs LAN IP address
Provides access to output on/off control, filter on/off
and type, SYNC output on/off control and properties,
and start phase offset between channels.