Using The Digital Pulse Generator - Tabor Electronics 5064 User Manual

2074
User Manual
Using the Digital
Pulse Generator
1
3
3-52
The digital pulse generator function provides means of designing
pulses and their associated parameters in units of time, exactly as
would be done on a stand-alone, bench-type, analog pulse
generator. Note however, that the pulse is built in the same memory
as the arbitrary waveforms are being stored and therefore,
changing from arbitrary to digital pulse modes and reverse, may
overwrite waveforms that were downloaded to the memory. Use the
instructions below to access and program the pulse menus.
1. Press TOP to display the root menu.
2. Press the arrow down key once and observe that the Auxiliary
Functions menu appears.
3. Press Auxiliary Functions soft key and notice that the Pulse
Generator option is highlighted, as shown in Figure 3-31.
4. Press the Enter button to select the digital pulse generator
function Figure 3-32 shows the Pulse Generator panel and
menus.
Figure 3-31, Accessing the Pulse Generator Menus
The pulse shape on the 2074 LCD display is an icon
only. The actual output waveform may look entirely
different.
Note
2
4