2074
User Manual
General/Filters
4-34
Figure 4-26, the System Panels
The General/Filters panel provides access to some general system
common commands, allows read back of information that is stored
in the flash and provides means of adding filters to the output path.
The General/Filters panel and the various parameters that control
these functions are described below.
Figure 4-27, the General/Filters Panel
System
The System group has three buttons that are normally associated
with system control. These are:
Reset – generates soft reset to the instrument controls and dialog
boxes and modifies all parameters to factory default. A list of factory
defaults is given in Chapter 5.
Query Error – queries the 2074 for programming errors. This
command is normally no necessary because ArbConnection makes