Table of Contents
Advertisement
Figure 1 -16, Typical Front Panel Programming of a Sequence Table
Sequence Advance
Modes
Figure 1 -17, ArbConnection Sequence Table Studio
As shown above, sequences are built as simple table of which
define link, segment, loops and advance bits. When placed in
sequenced mode, the output is changing from link to link in an
ascending order. The term Sequence Advance Modes defines what
is causing the instrument to step from link to link. There are four
basic advance modes that can be selected for the sequence mode:
Auto, Stepped, ingle and Mixed. These modes are explained in the
following paragraphs. Also note that there are some limitations that
1-25
Advertisement
Table of Contents
