Table of Contents
Advertisement
2074
User Manual
The Operation
Panels
4-8
After you change the displayed readout, the 2074 will be
updated with the new parameter only after you press the
Execute button.
Digital Display – The display is used for displaying and reading
various 2074 parameters, just as you would use it on your
instrument.
Normal color of the digital reading is dark blue. If you
modify the reading, the color changes to a lighter shade
of blue, indicating that the 2074 has not been updated
yet with the new parameter. Pressing Execute will
update the instrument and will restore the color of the
digital readout to dark blue, indicating that the displayed
value is the same as the generator setting.
Also note that the digital readout has an autodetect
mechanism for the high and low limits. You cannot
exceed the limits if you are using the dial but only if you
use the keypad. In case you do, the program will not let
you download an illegal parameter and you'll be
requested to correct your setting.
The Operation tab provides access to a group of panels that control
the basic operation of the generator. From this group you can set
the output function, run mode, turn the outputs on and off and
adjust the parameters for the various functions. There are four
panels in this group: Main, Standard, Arbitrary/Sequence and
Trigger. The Main panel is always visible because this is the panel
that controls operating functions, run modes and sets the outputs
on and off. The other panels can be made visible by clicking on the
appropriate tab in the Operation group. The Operations Panels bar
is shown in Figure 4-4 and the operation panels are described
below.
NOTE
Note
Advertisement
Table of Contents
