Table of Contents
Advertisement
2
Configuring the Instrument
Selecting a Remote interface
Figure 2-3, USB Device Detected
Figure 2-4, Found New Hardware Wizard
Immediately thereafter, the Found New Hardware Wizard will open,
as shown in Figure 2-4. Select the Install from a list or specific
Location option and click on next. At this time insert the installation
CD into your CD driver. If you know the logical letter for your CD
drive, type in the information in the path field. If you are not sure
where this driver is, click on the Browse button and look for the
path. Check the appropriate controls as shown in Figure 2-5 and
then click on Next. With Service Pack 2 only, you'll be prompted
with a Windows Logo Warning message, as shown in figure 2-6,
advising you that the software has not been verified for its
compatibility with Windows XP. Click on Continue Anyway. To
complete the process press on Finish, as shown in Figure 2-7.
2-9
Advertisement
Table of Contents
