Table of Contents
Advertisement
The Auxiliary
Panels
Counter/Timer
The Auxiliary tab provides access to a group of panels that control
some auxiliary and Utility functions.
There are six panels in this group: Counter/Timer, which provides
access to the auxiliary Counter/Timer function; Pulse Generator,
which provides access to the auxiliary digital pulse generator
function; Half Cycle, which provides access to the half cycle
functions; Digital Patterns, which provides access to the auxiliary
digital pattern generator function; and X-Instrument Sync for multi
instrument synchronization control.
The Auxiliary set of panels is shown in Figure 4-19. Each of the
panels is described below.
Figure 4-19, the Auxiliary Panels
The Counter/Timer panel contains controls that select the
measurement function and adjusts the counter/timer parameters
for measuring external signals. The counter/timer measures
signals that are connected to the TRIG IN input. The various
parameters that control the counter/timer features are described
below.
State
The State Group has controls to turn the counter on and off. And to
reset the counter and arm it for the next measurement cycle. Note
that when the counter function is turned on, all other waveform
generation features of the 2074 are purged.
Measurement Function
The measurement function group has control to select the
measurement function for the counter/timer operation. The 2074
can measure the following function: Frequency, Period, Period
4
ArbConnection
The Control Panels
4-27
Advertisement
Table of Contents
