Selecting Pulse Editor Options - Tabor Electronics 5064 User Manual

Setting the Pulse Editor
Options
Now that we somewhat understand the terms we use for the pulse
design, we start with an example how to design the pulse train as
shown in Figure 4-47. If you already have some pulses shown on
your pulse composer screen, click on New to start from a fresh
page. Another step before you design your pulse train is to set the
design parameters in the options menu that will determine the way
that the pulse will be distributed in your waveform memory. Click on
View→Options and refer to Figure 4-49 throughout the following
description.
Figure 4-49, Selecting Pulse Editor Options
As shown in Figure 4-49, the pulse editor option dialog box is
divided to functional groups: Mode of operation, Design Units,
Memory Management and Pulse Transition Management. These
groups are described below.
Mode of Operation
There are three options in the mode of operation group.
The force pulse train to single segment option is recommended if
you are using one pulse section only. In this case, the pulse
waveform will occupy one segment only and the generator will
automatically be set to operate in arbitrary mode.
Generating Waveforms Using the Equation Editor
4
ArbConnection
4-63