4
ArbConnection
Generating Waveforms Using the Equation Editor
Figure 4-54, Building Section 4 of the Pulse Example
Pulse Example, Section 5
The fourth pulse section is complete. We are ready now to start
building the fifth and final section of the pulse as shown in Figure 4-
48. Point and click on the Edit command and select the Append
Section option. A new section number will appear and will show
empty next to the section identifier.
Note that there are fast transitions required for this section that will
start from the last point of the previous section and will connect to
the start point of the next section. Therefore, select the Time/Level
Points option in the Pulse Train Design Format. You are now ready
to start programming values. Type the section entries as shown in
Figure 4-55.
4-71