Table of Contents
Advertisement
2074
User Manual
The Waveform
Screen
4-44
Waveforms are created and edited on the waveform screen. Figure
4-35 shows an example of a waveform created using the equation
editor and the anchors to limit generation of the waveform between
points 100 and 900. The various elements of the waveform screen
are described below.
The waveform screen has two axes – vertical and horizontal. Both
axes are divided into points.
The vertical axis is labeled from –8191 through 8192 for a total of
16,384 point. This number represents 14 bits of vertical resolution
and cannot be changed because it is critical to the range of which
the 2074 operates.
The horizontal axis, by default has 1000 points (from point 0 to
999). This number can be changed using the Wave Length field in
the Toolbar. The maximum length depends on the option installed
in your instrument. The wave composer will let you define the
horizontal axis to a maximum of 2M words).
Figure 4-35, the Waveform Screen
Advertisement
Table of Contents
