Table of Contents
Advertisement
2074
User Manual
4-18
fresh settings
Close – removes the Waveform Studio from the screen. If you have
not saved your work, the table setting will be lost.
The Sequence Table
As was explained in the above, the waveform memory can be
divided into smaller segments and up to 2048 segments can be
defined and used as individual arbitrary waveforms. Having a
limited size of waveform memory can, for some applications, pose a
limitation however, if sections of the waveform are repetitive, one
may use the sequence generator to take these segments and
replay them as part of the complete waveform without loosing
valuable
memory
space
coherences, or integrity. The tool for using repetitive and multiple
segments in one long waveform is called Sequence Generator. The
2074 has two separate sequence generators, one for each channel
and ArbConnection has a special dialog box where sequences are
designed. This tool is called – Sequence Table.
Using the Sequence table you can use waveforms that you already
downloaded to the 2074 from the Segment table, link and loop in
random order to create one long and complex waveform that
combines the individual memory segments.
Figure 4-10, the Sequence Table
and
without
scarifying
waveform
Advertisement
Table of Contents
