Table of Contents
Advertisement
4
ArbConnection
Generating Waveforms Using the Equation Editor
View Commands
The View commands have commands that let you view various
sections of the pulse area. The View commands include: Pulse
Editor, Full Train or individual Sections, Channel 1, 2, 3 and 4
screens and Options. Description of the view commands is given in
the following.
Pulse Editor
The view Pulse Editor command invokes a dialog box as shown in
Figure 4-44. In general, the pulse editor is used for placing straight
line segments on the screen in intervals that define pulse width,
rise/fall times and amplitude. Information how to use the pulse
editor to create pulse trains is given later in this chapter.
Full Train
The view Full Train shows on the pulse screen all sections of the
pulse train. Eventually, when all pulse sections have been
designed, the entire pulse train as shown when the Full Train option
has been selected will be downloaded to the instrument as a single
waveform.
Figure 4-44, the Pulse Editor
Single Section
The view Single Section shows on the pulse screen one section at
a time. Eventually, when all pulse sections have been designed, the
entire pulse train as shown when the Full Train option has been
selected will be downloaded to the instrument as a single
waveform.
Channel 1
The view Channel 1 command updates the waveform screen with
the Channel 1 pulse train. If you have not yet generated a waveform
for channel 1, the waveform screen will show a clear display.
4-59
Advertisement
Table of Contents
