Table of Contents
Advertisement
The Opening
Screen
Invoke ArbConnection by double clicking on the icon. If you cannot
find the icon on your desktop, click on Start, Programs and
ArbConnection. The opening screen will show. If you installed the
program correctly, your screen should look as shown in Figure 4-1.
Figure 4-1, Startup & Communication Options
The Startup & Communication Options dialog box is displayed. You
can check the "Store and don't show..." so next time you invoke
ArbConnection, this dialog box will not be displayed. The purpose of
this dialog box is to update the program in the way you intend to
use it. For example, if you are using a GPIB device that has
address 4, you can click on the Specify an Address option and type
in the required address so the next time you use ArbConnection,
the program will automatically resume communication with the
same address as was originally detected.
If you chose to hide this dialog box, you can still access and change
the options from the System command, at the top of the screen.
Make your selection and click OK. The Startup & Communication
Updater dialog box will be removed from the screen. And the Main
panel will now be accessible. But before we go into panel operation,
let's look at the toolbars at the left top of the screen as shown in
Figures 4-2 and 4.2A.
Figure 4-2, ArbConnection's Toolbars
4
ArbConnection
The Opening Screen
4-5
Advertisement
Table of Contents
