Table of Contents
Advertisement
2074
User Manual
1
3
Figure 3-41, Selecting the Multi-Instruments Synchronization Menus
3-66
3. Press the Auxiliary Functions soft key button
4. Use the dial or the up/down keys to scroll down to the X-Inst
Sync option, as shown in figure 3-65
5. Press Enter. The display will change to show the multi-
instruments synchronization menus
6. Press the Properties soft key button and select the role of the
instrument as mater, as shown in figure 3-66. You may select
from this menu if the instrument will be master or slave. If you
select as slave, you will be able to program the start phase
offset for the slave instrument as well.
Figure 3-42, Selecting the Couple State
4
2
5
Advertisement
Table of Contents
