Building Section 1 Of The Pulse Example - Tabor Electronics 5064 User Manual

4
ArbConnection
Generating Waveforms Using the Equation Editor
Repeat – Allows multiplication of pulse segments without the need
to re-design repetitive parts. After you enter a repeat value, press
the Apply button to lock in the repeat multiplier.
Duration – Displays the time that will lapse from the start of the
pulse section to the end. The duration shows the total time lapse,
including the repeated sections.
Control Buttons
The control buttons allow appending, inserting, and deleting one or
all index lines. The Undo button is useful in cases where an error
was made and restoration of the last operation is critical.
Pulse Example, Section 1 Now that we are better familiar with the pulse editor and its options,
we are ready to start building the first section of the pulse as shown
in Figure 4-47. Point and click on the New icon and open the pulse
editor. Type in the level and time intervals as shown in Figure 4-51.
Note that the pulse segments are being created on the screen as
you type the values.
Figure 4-51, Building Section 1 of the Pulse Example
4-67