Table of Contents
Advertisement
2074
User Manual
Long Term
Storage or
Repackaging for
Shipment
Preparation for
Use
Installation
2-4
If the instrument is to be stored for a long period of time or shipped
to a service center, proceed as directed below. If repacking
procedures are not clear to you or, if you have questions, contact
your nearest Tabor Electronics Representative, or the Tabor
Electronics Customer Service Department.
1.
Repack the instrument using the wrappings, packing material
and accessories originally shipped with the unit. If the original
container is not available, purchase replacement materials.
2.
Be sure the carton is well sealed with strong tape or metal
straps.
Mark the carton with the model and serial number. If it is to
3.
be shipped, show sending and return address on two sides of
the box.
If the instrument is to be shipped to Tabor Electronics
for calibration or repair, attach a tag to the instrument
identifying the owner. Note the problem, symptoms, and
service or repair desired. Record the model and serial
number of the instrument. Show the RMA (Returned
Materials Authorization) order as well as the date and
method of shipment. ALWAYS OBTAIN AN RMA
NUMBER FROM THE FACTORY BEFORE SHIPPING THE
2074 TO TABOR ELECTRONICS.
Preparation for use includes removing the instrument from the
container box, installing the software and connecting the cables to
its input and output connectors.
If this instrument is intended to be installed in a rack, it must be
installed in a way that clears air passage to its cooling fans. For
inspection and normal bench operation, place the instrument on the
bench in such a way that will clear any obstructions to its rear fan to
ensure proper airflow.
Using the 2074 without proper airflow will result in
damage to the instrument.
NOTE
CAUTION
Advertisement
Table of Contents
