Building Section 3 Of The Pulse Example - Tabor Electronics 5064 User Manual

2074
User Manual
Pulse Example, Section 4
4-70
Figure 4-53, Building Section 3 of the Pulse Example
The third pulse section is complete. We are ready now to start
building the forth section of the pulse as shown in Figure 4-48. Point
and click on the Edit command and select the Append Section
option. A new section number will appear and will show empty next
to the section identifier.
Before you start entering values to this section, note that there is
only one linear transition required for this section that will start from
the last point of the previous section and will connect to the start
point of the next section. Therefore, select the Time/Level Points
option in the Pulse Train Design Format. You are now ready to start
programming values. Type the section entries as shown in Figure 4-
54.