The Pulse Editor Options - Tabor Electronics 5064 User Manual

2074
User Manual
Tools Commands
4-60
Channel 2
The view Channel 2 command updates the waveform screen with
the Channel 2 pulse train. If you have not yet generated a waveform
for channel 2, the waveform screen will show a clear display.
Options
The view options command opens the dialog box as shown in
Figure 3-45. Use this dialog box to fine-tune the pulse composer to
the way it should deal with operational modes and the waveform
memory. Information on options is given later in this chapter.
Figure 4-45, the Pulse Editor Options
The Tools commands let you download pulse trains to either
channel 1, 2, 3 or channel 2. You can also clear the entire
waveform memory using the Clear memory command.
The Clear Memory command affects the entire waveform
memory of the 2074 and therefore, be careful not to
erase memory segments that you'll need to use with the
arbitrary function.
Note