Proxim ORiNOCO AP-800 Software Management Manual page 16

:
• The user may need to disable Windows Firewall for ScanTool to function or to detect the radio.
• ScanTool works only for the Proxim products.
3.1.2 Initialize the Device by using ScanTool
To scan and locate the devices on a network by using ScanTool, do the following:
1. Power on, or reset the device
2. To download Proxim's ScanTool, log on to Proxim's support site at
with (Answer ID 1735). Upon successful download, double-click the ScanTool icon on the Windows desktop to launch
the program (if the program is not already running).
3. If your computer has more than one network adapter installed, you will be prompted to select the adapter that you
want ScanTool to use. You can use either an ethernet or a wireless adapter. Select an adapter and click OK.
4. The Scan List screen appears.
5. ScanTool scans the subnet and displays a list of detected devices in the Scan List. You can change your adapter setting
at any time by clicking the Select Adapter on the Scan List screen.
6. The screen contains the following information:
• MAC Address
• System Name
• IP Address
• Uptime
• System Description: System Description contains the following information.
— Device Description (ORiNOCO
— Firmware Version v4.X.Y (v4.1.0)
— Serial Number (SN-SN000000000000121212)
®
ORiNOCO 802.11n Access Points - Software Management Guide
http://support.proxim.com
Figure 3-1 Scan List
®
AP-8100-WD)
Device Initialization
and search for ScanTool
16