Proxim ORiNOCO AP-800 Software Management Manual page 66

5.6.3 802.1d to 802.1p
Navigate to CONFIGURATION > QoS > 802.1d to 802.1p. The 802.1d to 802.1p Mapping Table screen appears.
Tabulated below are the 'QoS 802.1d and 802.1p (for layer 2 policies) parameters and the method to configure the
configurable parameters:
Parameter
802.1d Priority
802.1p Priority
Click OK and COMMIT, to save the configured parameters.
5.6.4 QoS Profile
Navigate to CONFIGURATION > QoS > QoS Profile. The QoS Profile screen appears.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 5-27 802.1d to 802.1p Mapping Table
Represents the 802.1d priority. It is a read-only parameter and cannot be configured.
Specifies the 802.1p priority mapped to the corresponding 802.1d priority. To configure,
enter the 802.1p Priority, for the corresponding 802.1d priority, in the range of 0 to 7.
Figure 5-28 QoS Profile
Description
Device Configuration
66