®
ORiNOCO
802.11n Access Points - Software Management Guide
•
If you select the SNMP version as SNMP v3, then following configuration screen
appears:
Figure 6-19 SNMP Version - SNMPv3
Configure the following parameters:
Parameter
Security Level
Priv Protocol
Description
Specifies the security level of the device. AP device supports
the following security levels:
– None: For no authentication
– AuthNoPriv: For Extensible Authentication
– AuthPriv: For both Authentication and Privacy
(Encryption)
By default, it is AuthPriv. To configure, select the security
level from the drop down menu.
Specifies the type of privacy (or encryption) protocol.
By default, Priv Protocol is AES-128. To configure, select
the encryption standard as either AES-128 (Advanced
Encryption Standard) or DES (Data Encryption Standard)
from the drop down menu.
: Priv Protocol is applicable only when the security
level is set to AuthPriv.
Device Management
108