Proxim ORiNOCO AP-800 Software Management Manual page 122

IP Address
VAP Number
VAP Type
RSSI
Tx Rate (Mbps)
State
Disassociate
To view detailed station statistics, click
®
ORiNOCO 802.11n Access Points - Software Management Guide
Specifies the IP address of the wireless client.
:
• IP Address is not applicable to a WDS enabled wireless client. By default, it is
"0.0.0.0".
• IP Address is not applicable, if Proxy ARP is disabled.
Specifies the VAP number enabled on either interface 1 or interface 2.
Specifies the type of the VAP enabled.
Specifies the strength of the signal received by the wireless client. The signal strength
detected by the radio of the device, varies between the values 0 - 128. The higher the value,
the greater is the received signal strength.
Specifies the rate at which the last data packet is received.
Specifies the current status of the wireless client.
Specifies the parameter that disassociates a particular wireless client from the device.
: Disassociate option is not applicable to a WDS enabled wireless client.
Edit icon. The configuration screen appears:
Device Monitoring
122