Proxim ORiNOCO AP-800 Software Management Manual page 92

GPS Longitude
GPS Latitude
GPS Altitude
Click OK, to save the configured parameters.
6.1.2 Inventory Management
This section provides inventory information about the device. Navigate to MANAGEMENT > System > Inventory
Management. The System Inventory Management Table appears.
By default, the components information is auto-generated by the device. This information is standard and is used only for
reference purpose. Click Refresh, to view the updated System Inventory Management information.
: Wireless Card 2 is applicable only to dual-radio device.
6.1.3 License Information
Licensing is considered to be the most important component of an enterprise-class device which typically has a feature-based
pricing model. It is also required to prevent the misuse and tampering of the device by a wide-variety of audience whose
motives may be intentional or accidental. Licensed Features are, by default, set by the company.
Navigate to MANAGEMENT > System > License Information. The License Information screen appears.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Specifies the longitude at which the device is installed.
To configure, enter a longitude value of maximum 255 characters (in the format required by
your Network Management System) in the GPS Longitude box.
Specifies the latitude at which the device is installed.
To configure, enter a latitude value of maximum 255 characters (in the format required by
your Network Management System) in the GPS Latitude box.
Specifies the altitude at which the device is installed.
To configure, enter an altitude value of maximum 255 characters (in the format required by
your Network Management System) in the GPS Altitude box.
Figure 6-2 System Inventory Management Table
Device Management
92