Proxim ORiNOCO AP-800 Software Management Manual page 110

Configure the following parameters:
Parameter
IP Address
Password
Comment
Entry Status
Click Add, to add an entry to the SNMP Trap Host Table.
6.3.4 SYSLOG Host Table
System log messages are generated by the device by sending requests at various instances to the system log server. The
system log messages are lost on device reboot. Navigate to MANAGEMENT > Services > SYSLOG Host Table, the
configuration screen appears.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 6-20 SNMP Trap Host Table Add Row
Specifies the IP address to which SNMP traps will be delivered. To configure, enter the IP
address in the IP Address box.
To access SNMP traps, enter password in the Password box. A minimum of 6 and a
maximum of 32 characters are allowed.
: Applicable only to SNMP version v1-v2c.
Enter any comments in the Comment box.
Select the Entry Status as either Enable or Disable from the drop down menu.
Figure 6-21 SYSLOG Host Table
Description
Device Management
110