Bridge - Proxim ORiNOCO AP-800 Software Management Manual

7.4 Bridge

The device serves as a bridge between the wired and the wireless networking devices.
7.4.1 Bridge Statistics
The Bridge Statistics allows you to monitor the statistics of the Bridge.
To view bridge statistics, navigate to MONITOR > Bridge > Bridge Statistics. The Bridge Statistics screen appears.
The Bridge Statistics screen contains the following information:
Parameter
Description
Type
MTU
Physical Address
Operational Status
In Octets
In Unicast Packets
In Non-Unicast
Packets
In Errors
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 7-6 Bridge Statistics
Specifies the interface type that is 'Bridge'.
Specifies the type of interface that is distinguished according to the physical/link protocol(s)
below the network layer in the protocol stack.
Specifies the largest size of the data packet sent on the bridge.
Specifies the MAC address of the interface.
Specifies the current operational status of the bridge.
Specifies the total number of octets received on the bridge.
Specifies the number of unicast sub-network packets delivered to the higher level protocol.
Specifies the number of non-unicast sub-network packets delivered to the higher level
protocol.
Specifies the number of inbound packets with errors and that are restricted from being
delivered. In Errors on the wireless interface include CRC errors.
Description
Device Monitoring
125