Access Control - Proxim ORiNOCO AP-800 Software Management Manual

Parameter
Enable SNTP Status
Primary Server IP
Address / Domain
Name
Secondary Server IP
Address / Domain
Name
Time Zone
Day Light Saving
Time
Current Date/Time
Click OK and COMMIT, to save the configured parameters.
: Configure the parameters Primary Server IP Address / Domain Name, Secondary Server IP Address / Domain
Name and Time zone and Day Light Saving Time, only when the SNTP status is enabled.

6.5 Access Control

The Management Access Control feature allows you to manage the device from the specified host. Navigate to
MANAGEMENT > Access Control. The Management Access Control Table screen appears.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Specifies the status of the SNTP feature on the device.
Select Enable SNTP Status checkbox to synchronize the date and time of the device with
the SNTP time server.
Specifies the host name or the IP address of the primary SNTP server.
To configure, enter the Primary Server IP Address/Domain Name.
Specifies the host name or the IP address of the secondary SNTP server.
To configure, enter the Secondary Server IP Address/Domain Name.
Specifies the time zone set for the SNTP.
To configure, select the desired time zone from the drop down menu
Specifies the number of hours adjusted for the Daylight Saving Time.
To configure, select the desired Day Light Saving Time from the drop down menu.
Specifies the system current date and time. It is read-only parameter and cannot be
configured.
– If SNTP is not enabled, the current date and time are automatically generated by the
local system.
– If SNTP is enabled, it displays the time, that the device has obtained from the SNTP
server.
Figure 6-24 Management Access Control Table
Description
Device Management
113