Proxim ORiNOCO AP-800 Software Management Manual page 53

5.5.1.1 Create a New Security Profile
To add a new security profile, click Add in the Wireless Security Configuration screen. The Wireless Security Add Row
screen appears.
Tabulated below are the 'Wireless Security Profile' parameters and the method to configure the configurable parameters:
Parameter
Profile Name
Authentication
Mode
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 5-16 Wireless Security Profile - Add Row
Specifies the name of the Security Profile created. To configure, enter a name in the Profile
Name box.
Specifies the security mode for the wireless network. Select any of the following
authentication modes for the wireless interface from the drop down menu:
a. None: If you select this authentication mode, then no security exists on the wireless
network.
b. WEP (Wired Equivalent Privacy): Select WEP from the authentication mode drop
down menu and the configuration screen appears:
Description
Figure 5-17 WEP Authentication Mode
Device Configuration
53