Proxim ORiNOCO AP-800 Software Management Manual page 124

The Rogue Scan Statistics screen, contains the following information:
Parameter
SSID
MAC Address
(BSSID)
Device Type
Channel
Security
TSLF
RSSI
Click Refresh, to view the updated Rogue Scan Statistics and click Clear, to clear the Rogue Scan Statistics.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 7-5 Wireless Interface 1 Rogue Scan Statistics
Specifies the SSID of the detected device.
Specifies the MAC address of the detected device.
Specifies the device type (AP, STA, Adhoc, WDS and other devices) detected.
Specifies the channel of the detected device.
Specifies the security applied on the detected device. Tabulated below are different Security
types and the corresponding Authentication Modes / Encryption Types applied on the device.
Security
None
WPA
WPA2
Other / WEP
Specifies the time period since the last frame is received (TSLF) over the channel. It is
recorded in dd : hh : mm : ss (days: hours: minutes: seconds)
Specifies the strength of the signal received by the detected device. The signal strength
detected by the device, varies between 0 - 128. The higher the value, the greater is the
received signal strength.
Description
Encryption Type /
Authentication Mode
WEP
PSK-TKIP / Dot1x TKIP
PSK-AES / Dot1x AES
Device Monitoring
No security
WEP / Dot1x
Other
124