Proxim ORiNOCO AP-800 Software Management Manual page 127

Hide thumbs Also See for ORiNOCO AP-800:
Table of Contents

Advertisement

Parameter
Index
Physical Address
Net Address
Type
Click Refresh, to view updated IP ARP Table statistics and click Clear, to clear the IP ARP Table statistics.
7.5.2 Internet Control Message Protocol (ICMP) Statistics
'ICMP Statistics' allow you to monitor the message traffic that is received and transmitted by the device.
To view ICMP statistics, navigate to MONITOR > Network Layer > ICMP Statistics. The ICMP Statistics screen appears.
The ICMP Statistics screen contains the following information:
Parameter
In Msgs/Out Msgs
In Errors/Out Errors
In Dest
Unreachs/Out Dest
Unreachs
®
ORiNOCO
802.11n Access Points - Software Management Guide
Specifies the interface type.
Specifies the MAC address of a node on the network.
Specifies the corresponding IP address of a node on the network.
Specifies the type of mapping, that is dynamic or static.
Figure 7-9 ICMP Statistics
Specifies the number of ICMP messages that are received or transmitted by the device.
Specifies the number of ICMP messages that are received or transmitted by the device, but
determined as having ICMP-specific errors such as Bad ICMP checksums, bad length, etc. In
Errors on the wireless interface include CRC errors.
Specifies the number of ICMP messages, received or transmitted by the device, that do not
reach the destination.
Description
Description
Device Monitoring
127

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orinoco ap-8100Orinoco ap-8000

Table of Contents