Proxim ORiNOCO AP-800 Software Management Manual page 91

In the System Information screen, you can view and configure the following configurable parameters:
Parameter
System Up-Time
System Description
System Name
Contact
Email
Phone Number
Location
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 6-1 System Information
Represents the operational time of the device since its last reboot. It is a read-only parameter
and cannot be configured.
Specifies the system description including the device name, current version of the firmware
and the current build number. System description cannot be configured.
Specifies the name assigned to the device. To configure, enter a System Name of maximum
64 characters.
Specifies the contact information (Email id, Phone number, Location) of the person
administering the device.
To configure, enter the Contact information of maximum 255 characters.
Specifies the email address of the person administering the device.
To configure, enter an email address of minimum 6 and maximum 32 characters in the
Email box.
Specifies the phone number of the person administering the device.
To configure, enter a phone number of minimum 6 and maximum 32 characters in the
Phone Number box.
Specifies the location where the device is installed.
To configure, enter a location name of maximum 255 characters in the Location box.
Description
Device Management
91