Proxim ORiNOCO AP-800 Software Management Manual page 31

Tabulated below are 'Link Integrity' parameters and the method to configure the configurable parameters
Parameter
Status
Polling Time
Offline Polling Time
Polling Retries
Link Status
Click OK and COMMIT, to save the configured parameters.
5.2.2.1 Link Integrity Server Table
The Link Integrity Server Table displays the list of pre-configured servers. Atleast one server should be added to the table, to
enable the link integrity feature on the device.
Link Integrity Server Table - Add Row
To add a server:
1. Click Add in the Link Integrity screen, the Link Integrity Server Table - Add Row screen appears.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Specifies the status of the link integrity feature on the device.
By default, it is disabled. To enable, select Enable from the drop down menu.
Specifies the time interval, during which the device will check the link integrity with its
configured server(s) by sending the ICMP echo probes.
By default, the Polling Time is 30 seconds. To configure, enter the time interval between 5
seconds - 180 seconds.
Specifies the time interval, during which the device will send the ICMP echo probes to
server(s) in offline mode (When the Link status is DOWN).
By default, the Offline Polling Time is 1 second. To configure, enter the time interval
between 1 second - 5 seconds
Specifies the number of attempts made by the device in sending the ICMP echo probes to
the server(s), before declaring the overall link status as DOWN.
By default, the Polling Retries taken is 2. To configure, enter the number of attempts
between 1-10
Specifies the connectivity status between a server and a device. Link Status can either be UP,
DOWN or NONE.
– UP: Specifies the status of the link when AP device receives the server's
acknowledgment.
– DOWN: Specifies the status of the link when AP device does not receive the server's
acknowledgment.
– NONE: Specifies the status of the link when the AP device is trying to connect to the
server(s), that is when the Link Status is neither UP nor DOWN.
Description
Device Configuration
:
31