Factory Default Configuration - Proxim ORiNOCO AP-800 Software Management Manual

SSID
Security
Ensure to COMMIT the configured changes and REBOOT the device.

4.2 Factory Default Configuration

Parameter
User Name
Password
System Name
Network Mode
IP Address Assignment Type
Fall Back IP Address
Subnet Mask
Gateway IP Address
Link Integrity Status
STP Status
Radio Mode
Radio Status
Country Code
®
ORiNOCO 802.11n Access Points - Software Management Guide
Default SSID set on both the radios, is as tabulated below:
Device Type
AP-800
AP-8000
AP-8100
For details on how to change SSID, refer to
By default, the security is set to None. For details, refer to
admin
public
System-Name
Bridge
Dynamic
169.254.128.132
255.255.0.0
169.254.128.133
Disabled
Disabled
Radio1: AP
Radio2: AP
Enabled
NoCountry (World Regulatory Domain)
US (US Regulatory Domain)
JP (JP Regulatory Domain)
UnitedKingdom (EU Regulatory Domain)
Radio 1
My Wireless Network 1_1
My Wireless Network 1_1
My Wireless Network 1_1
Virtual Access Point (VAP)
Default Values
Basic Configuration
SSID
Radio 2
Not Applicable
My Wireless Network 2_1
My Wireless Network 2_1
Wireless Security
24