Proxim ORiNOCO AP-800 Software Management Manual page 38

Tabulated below are 'Wireless Interface' parameters and the method to configure the configurable parameters:
Parameter
Radio Status
Radio Mode
Country Code
Operational Mode
®
ORiNOCO 802.11n Access Points - Software Management Guide
Specifies the status of the Interface (Radio).
By default, it is enabled. To disable, select Disable from the drop down menu. If the radio
status is disabled, the interface gets shutdown.
This parameter enables you to set the radio mode of the AP device. The available radio mode
is AP.
Specifies the country where the AP device is used.
•
US Regulatory Domain: The US country is by default selected, and is not
configurable.
•
Japan Regulatory Domain: The JP country is by default selected, and is not
configurable.
•
World Regulatory Domain: By default, NoCountry is selected. Select the country,
where the device would operate, from the available list of countries. Setting the
Country Code, makes the AP Device automatically compliant with the rules of the
regulatory domain in which it is used.
•
Europe Regulatory Domain: By default, UnitedKingdom is selected. If operating in
a country other than United Kingdom, select the country from the available list of
countries. Setting the Country Code, makes the AP Device automatically compliant
with the rules of the regulatory domain in which it is used.
Specifies the mode of communication between the AP device and the wireless client(s).
Tabulated below are the default and configurable operational modes for interface (radio) 1
of AP device.
Device
Type
Default
Operational Mode
AP-800 802.11a/n
AP-8000 802.11a/n
AP-8100 802.11a/n
:
• Operational mode configuration varies based on the
• The Interface (Radio) 1 of AP-8000-JP (Japan SKU) and AP-8100 can be configured only
in 5 GHz frequency band (802.11a or 802.11a/n modes).
• Configuring the Current Bandwidth
factory default value. Hence, ensure that you re-configure the operational mode and
COMMIT the changes.
Description
Interface (radio) 1
Configurable Operational
Modes
802.11a, 802.11a/n, 802.11g or 802.11g/n
802.11a, 802.11a/n, 802.11g or 802.11g/n
802.11a or 802.11a/n
Current Bandwidth
to 20 MHz sets back the operational mode to
Device Configuration
set.
38