Proxim ORiNOCO AP-800 Software Management Manual page 114

Configure the following parameters:
Parameter
Access Table Status
IP Address
Entry Status
Click OK and Reboot the device, if you have changed the values in the Access Control Table.
6.5.1 Add an Entry to the Access Control Table
To add new entries to the Access Control Table, click Add in the Management Access Control Table screen. The
Management Access Table Add Row screen appears:
Configure the following parameters:
Parameter
IP Address
Entry Status
Click Add, to add an entry.
:
• A maximum of five system IP addresses can be added to manage the AP device.
• You can add new entries only when the Access Table status is enabled.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Specifies the status of the Access Control on the AP device.
By default, the Management Access Control is disabled on the device. To enable it, select
Enable from the drop down menu.
Specifies the IP address of the machine that would manage the device.
Specifies the status of the added entry.
To configure, select Enable or Disable from the drop down menu.
Figure 6-25 Management Access Control - Add Row
Specifies the IP address of the system that manages the AP device. To configure, enter the IP
address in the IP Address box.
By default, the entry status is enabled. To configure, select the status form the drop down
menu.
Description
Description
Device Management
114