Proxim ORiNOCO AP-800 Software Management Manual page 55

Authentication
Mode
®
ORiNOCO 802.11n Access Points - Software Management Guide
Parameter
Encryption Type
PSK
Rekeying Interval
d. 802.1x: Select 802.1x (Dot1x) from the Authentication mode drop down menu and
the configuration screen appears:
Figure 5-19 802.1x Authentication Mode
Configure the following parameters in 802.1x (Dot1x) Authentication Mode:
Description
Specifies the Encryption Type.
By default, it is taken as WPA-TKIP. To configure, select
either WPA-TKIP, WPA2-AES or WPA-WPA2AES-TKIP
from the drop down menu.
:When the Encryption
WPA-WPA2AES-TKIP, the device supports clients
with the encryption type of either WPA-TKIP or
WPA2-AES.
Specifies the pass phrase that derives the PSK. To
configure, enter a security key ranging from 8 to 63
characters in the PSK box.
: Special characters - = \ " '? / space are not
allowed while configuring the pass phrase.
Specifies the time interval, for the device to send group
keys to all its associated clients.
By default the Rekeying Interval value is set to 43200.
To configure, enter a value ranging from 900 to 65535
seconds.
Device Configuration
Type is set to
55