Tabulated below are the 'QoS Profile' parameters and the method to configure the configurable parameters:
Parameter
QoS Profile Name
Policy Name
EDCA Profile Name
QoS NoACK Status
Click OK and COMMIT, to save the configured parameters.
: QoS Profile Name is applicable only to wireless interfaces.
5.6.5 QoS Policy
Navigate to CONFIGURATION > QoS > QoS Policy. The Qos Policy screen appears.
Tabulated below are the 'QoS Policy' parameters and the method to configure the configurable parameters:
Parameter
Policy Name
®
ORiNOCO
802.11n Access Points - Software Management Guide
Represents the QoS profile name. It is a read-only parameter and cannot be configured.
: By default, the available QoS Profile Name is 'Default'.
Specifies the QoS policy name. By default, the QoS Policy Name is Default.
Specifies the EDCA Profile Name. By default, the EDCA Profile Name is Default.
Specifies the QoS profile acknowledgement status. By default, the QoS NoACK Status is
disabled. To configure, select either Enable or Disable from the drop down menu.
Figure 5-29 QoS Policy
It represents the QoS Policy Name. It is a read-only parameter and cannot be configured.
Description
Description
Device Configuration
67