Proxim ORiNOCO AP-800 Software Management Manual page 21

Before applying commit, the system displays a confirmation message, as shown in the following figure:
Click OK, if you wish to commit the changed parameters.
On successful Commit operation, the following screen appears:
If the configured parameters requires reboot, on committing the following screen appears.
3.3.2 Reboot
Reboot operation is required for any change in the key parameters to take effect. For example, settings such as configuring
the Radio Mode, IP Address, and Network Mode need reboot to take effect. See
details. On clicking REBOOT, system displays a confirmation window as shown below.
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 3-6 Commit
Figure 3-7 Commit Status
Figure 3-8 Commit Status with Reboot Message
Figure 3-9 Reboot
Device Initialization
Parameters requiring Reboot, for more
21