Changing The Oil, Axis-3 Gearbox - ABB IRB 4600 Foundry Prime Product Manual

3.5.5 Changing the oil, axis-3 gearbox

Location of oil plugs
The axis-3 gearbox is located in the upper arm rotational center.
Oil plugs are shown in the figure.
xx0800000306
A
B
Required equipment
Equipment
Lubricating oil
Oil collecting vessel
Oil dispenser
Funnel
Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
Oil plug, armhouse
Oil plug, gearbox (not visible in this figure)
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.5.5 Changing the oil, axis-3 gearbox
Note
Information about the oil is found in Technical
reference manual - Lubrication in gearboxes.
See Type and amount of oil in gearboxes on
page 151.
The capacity of the vessel must be sufficient
to take the complete amount of oil.
One example of oil dispenser can be found
in section:
• Type of lubrication in gearboxes on
page 151
xx1200000862
Continues on next page
171