ABB IRB 4600 Foundry Prime Product Manual page 145

5
6
Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
3.4.11 Inspecting the leak proof o-ring and pressure relief valves
Action
Check if the pressure relief valves are con-
taminated or covered with litter.
Clean if necessary.
Note
Use a cloth or a brush.
Seal and paint the joints that have been
opened. Also repair possible damages of the
special Foundry Prime paint coat of the robot.
See Cut the paint or surface on the robot be-
fore replacing parts on page
© Copyright 2013-2018 ABB. All rights reserved.
Note
xx1700001178
201.
3 Maintenance
Continued
145