3 Maintenance
3.4.7 Inspecting information labels
Continued
Inspecting labels
Use this procedure to inspect the labels on the robot.
1
2
3
134
Action
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
to the robot, before entering the robot work-
ing area.
Check all labels.
Replace any missing or damaged labels.
© Copyright 2013-2018 ABB. All rights reserved.
Note
See the figure in
Location of information
labels on page
133.
Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M