Operating Requirements - ABB IRB 6660 Product Specification

1.3.2 Operating requirements

Protection standards
Robot version/ Protection standard
All variants, manipulator
Explosive environments
The robot must not be located or operated in an explosive environment.
Ambient temperature
Description
Manipulator during op-
eration
For the controller
Complete robot during
transportation and
storage
For short periods (not
exceeding 24 hours)
a) At low environmental temperature < 10
warm-up phase recommended to be run with the robot. Otherwise there is a risk
that the robot stops or run with lower performance due to temperature dependent
oil- and grease viscosity.
b) Max ambient temperature in a high speed press tending cycle, + 40°C.
Relative humidity
Description
Complete robot during transportation and storage
Complete robot during operation
Product specification - IRB 6660
3HAC087212-001 Revision: A
Standard/Option
Standard
Standard/Option
Standard
Standard
© Copyright 2004-2023 ABB. All rights reserved.
1 Description
1.3.2 Operating requirements
IEC60529
IP67
Temperature
a)
+ 5°C (41°F) to + 50°C
b)
(122°F)
See Product specification - Control-
ler IRC5 with FlexPendant
- 25°C (- 13°F) to + 55°C (131°F)
up to + 70°C (158°F)
o
C is, as with any other machine, a
Relative humidity
Max. 95% at constant temperature
Max. 95% at constant temperature
19