Renesas H8 Series Hardware Manual page 80

Section 3 Exception Handling
Bit Bit Name
3 IWPF3
2 IWPF2
1 IWPF1
0 IWPF0
Rev. 1.00 Aug. 28, 2006 Page 50 of 400
REJ09B0268-0100
Initial
Value R/W Description
0 R/W
WKP3 Interrupt Request Flag
[Setting condition]
When WKP3 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF3 is cleared by writing 0.
0 R/W
WKP2 Interrupt Request Flag
[Setting condition]
When WKP2 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF2 is cleared by writing 0.
0 R/W
WKP1 Interrupt Request Flag
[Setting condition]
When WKP1 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF1 is cleared by writing 0.
0 R/W
WKP0 Interrupt Request Flag
[Setting condition]
When WKP0 pin is designated for interrupt input and the
designated signal edge is detected.
[Clearing condition]
When IWPF0 is cleared by writing 0.