Starting A Run; Canceling A Run; Rinsing The Liquid System - Thermo Scientific Wellwash Versa User Manual

Running Protocols

Starting a run

Starting a run
To start a run:
1. Press the START button to start the run.
The microplate will be processed according to the protocol.
Note Ensure that the liquid channels work properly during dispensing
and aspiration.
▲
2. Remove the plate after the protocol has ended.
Note Prime the instrument with deionized distilled water at the end of
the batch.
▲

Canceling a run

To cancel a run:
Press the STOP button to cancel a run.
Note It is not possible to stop the run when a user input is required as a
response to a warning or error message.
▲
Rinsing the
The button starts a sequence where the rinse liquid is pumped
RINSE
through the liquid system for a short period of time and left in the
liquid system
tubing. The rinse solution is normally deionized distilled water.
The volume used during rinsing is defined in the Settings > Prime &
rinse parameters > Rinse volume (Rinse button) (ml) menu. Refer to
"Prime & rinse parameters" on page 81.
Thermo Fisher Scientific Thermo Scientific Wellwash Versa User Manual 51